1. Use a level and a pencil to draw a parallel line across the wall about 3 inches up from the floor. Measure down from this line, to the floor, and find the floors high point (if it has one), and mark a line at that point. From that high point, Measure up 34 1/2 inches and draw a level line across the wall to designate the top of the base cabinets.
6. Now we are going to move onto the cabinets on either side of the corner cabinet. As you install each one, use the clamps to secure each cabinet to the neighboring cabinet and then check it for plumb with your level. On faceframe cabinets, it is a good idea to drill two 1/8 inch pilot holes through the sides of the faceframe and use screws. In this case, with frameless, ready-to-assemble kitchen cabinets we are going to screw through the plywood sides and use shims in between the cabinets to ensure a tight fit and make sure that the cabinet faces are plumb.
In the event that you think this is a project that you are comfortable tackling, you can either use a kitchen designer or go to one of the home improvement centers and take advantage of their free design services.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does uswaterpatrol.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.